What is the entire working process of stud finder?

Many times we think to add more values in the home by hanging some artwork on the walls. For doing this thinking, we need to have some tools so that we could find a place where stuff can easily attach. If you use the old methods, then you will need to make holes in the walls; it will fade the attentiveness of the home, so we need to have such a tool that can find stud without making any hole. For finding a stud, we can use a good stud finder; anyone can efficiently work with it. 

Image result for stud finder

The working process of a stud finder

When we are going to use the stud finder, then we need to consider some crucial aspects that we will discuss in further points. If you apply these points in your working process, then it becomes easy to locate the studs. 

  • First, we need to clear the wall with the help of a soft brush or a rag. When you are locating the stud removing the painting or any other artwork that is hanging near the locating point, if the wall is clear, then it will be easy to determine the stud. 
  • After making the wall clear, then turn on a good stud finder. Put it near the wall, make and press the button till you see a flashlight, or hear a slow voice. A stud finder will calibrate the device; you have to make sure that it is properly calibrated. 
  • Move a good stud finder on the wall where you are thinking of hanging something. We should move the tool slowly so that the devices could detach the right place easily and quickly. If we move it fast, then it will be challenging to locate the stud. 
  • Until you don’t find the stud don’t leave the buttons which you have pressed. Keep moving the stud finder against the wall until you don’t get the spot where a painting or singing can hang easily.


A stud finder is a good tool for locating the stud; one should know the right process of using it. Make sure that the battery of this tool is charger while using.